Conversion of waste plastics into value-added carbon materials

Plastic pollution is a major environmental issue worldwide, calling for advanced methods to recycle waste plastics in the context of the circular economy. Here we review methods and strategies to convert waste plastics into value-added carbon materials, with focus on sources, properties, pretreatment of waste plastics, and on preparation of carbon materials. Pretreatment techniques include mechanical crushing, plastic stabilization and electrospinning. Carbon materials such as carbon nanotubes, graphene, carbon nanosheets, carbon spheres and porous carbon are prepared by oxygen-limited carbonization, catalytic carbonization, the template-based method, and pressure carbonization. We emphasize the conversion of polyethene terephthalate, polyethylene, polypropylene, polystyrene, halogenated plastics, polyurethane and mixed plastics.

     

Mechanism of complexation of toxic arsenate,selenate, and molybdate with hydrotalcites

Environmental Chemistry Letters - Wastewater from the uranium mining industry contains toxic arsenate (AsO43–), selenate (SeO42–), and molybdate (MoO42–) that can be removed by...     

Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter

Environmental Science and Pollution Research - A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial...     

望虞河西岸九里河中四种除草剂的污染现状

基于气相色谱-质谱联用(GC-MS)法结合固相萃取(SPE)前处理技术,建立了水中4种除草剂氯草定、阿特拉津、乙草胺和异丙甲草胺残留的分析方法,于2018年春(4、5月)、秋(9、10月)和冬(1、3月)季对太湖流域望虞河西岸九里河水体中4种除草剂的污染现状进行调查分析。结果表明,4种除草剂的加标回收率为71. 2%～108%,RSD均10%,方法检出限为3. 5～6. 0 ng/L。九里河水体中氯草定、阿特拉津、乙草胺和异丙甲草胺4种除草剂质量浓度分别为未检出～0. 025 7,0. 019 1～1. 19,未检出～0. 026 0和未检出～0. 094 3μg/L。4种除草剂中阿特拉津最高值接近《地表水环境质量标准》(GB 3838—2002)限值,其他3种其值较低,氯草定首次在太湖流域水体中检出。     

Enhanced arsenate removal from aqueous solution by Mn-doped MgAl-layered double hydroxides

Environmental Science and Pollution Research - In this study, Mn-doped MgAl-layered double hydroxides (LDHs) were successfully synthesized for efficient removal arsenate from aqueous solution. The...     

南京典型站点春季大气颗粒物数谱分布特征

利用TSI公司的APS和SMPS系统,于2017年4月在江苏省环境监测中心点位连续一个月进行大气颗粒物数谱观测,结果表明,南京市春季典型月份大气颗粒物数浓度和体积浓度均值分别为1.64×104cm~(-3)和1.65×106μm~3/m~3;核模态、爱根核膜态、积聚模态和粗粒子模态数浓度占比分别为22.72%,53.52%,23.72%和0.05%,体积浓度占比分别为0.01%,1.76%,55.82%和42.41%;颗粒物数浓度平均日变化呈现双峰结构;PM_(2.5)体积浓度和质量浓度具有高度相关性;存在明显的新生粒子事件,3~10 nm颗粒物数浓度小时均值短时7 500 cm~(-3)。     

Nutrients Availability Shapes Fungal Community Composition and Diversity in the Rare Earth Mine Tailings of Southern Jiangxi,China

Russian Journal of Ecology - The present study characterized the nutrients availability of three rare earth tailings deserted in different time stages in Southern Jiangxi of China, and revealed the...     

船舶螺旋桨射流对湘江河床底泥扰动影响分析

船舶航行时螺旋桨产生的射流会对河道水流产生扰动,这种扰动是否能引起河床底泥的再悬浮需要更深入的论证分析。通过对比分析螺旋桨射流发展规律的研究成果,以湘江典型河段为研究对象,结合实船测量结果和此段河流地质资料,探讨了螺旋桨射流对湘江长株潭段河床底泥扰动的影响,并对此段河床底泥起动和悬浮条件进行了理论分析。结果表明:在周围环境流速较低的条件下,螺旋桨射流初始速度、河床水深及泥沙粒径是决定泥沙是否运动的主要因素。湘江长株潭河段已基本库区化,大部分河道平均水深远大于航道的标准水深2.8 m,河床泥沙平均粒径大于0.87 mm,其中细颗粒泥沙很少,由于螺旋桨射流断面平均流速小于泥沙起动流速,悬浮指标计算值远大于4,因此可以判断船舶正常航行在该段河流时底泥难以起动和再悬浮。     

强夯地基处理工艺在换流站场平施工中的应用

针对西北部分地区地表层粉砂分布不均、砂岩不易破碎、块石回填方量大、回填厚度深等问题,考虑特高压换流站工程地基处理的适用性及其成效、工期、造价等多方面因素,提出强夯地基处理方案。应用结果表明:该方法具有快速提高填土密实程度,加速填土前期固结,提高填土的物理力学性能,减少填土的后期沉降和建(构)筑物及地面设备基础的沉降等优点,可广泛应用于西北地区特高压换流站及其他大面积土石方开挖、回填及地基处理施工工程。     

聚硅酸钛制备及其助凝特性

采用在活化硅酸制备过程中加入适量Ti Cl4的方法,试制了一种新型无机高分子助凝剂—聚硅酸钛。研究了不同[Si]/[Ti]条件下制备的聚硅酸钛在固定p H值的水中分散物的粒径和Zeta电位随着活化时间的变化趋势,并与活化硅酸作比较。结果表明,在Si/Ti=20,活化48 h的条件下能制备出较为稳定的聚硅酸钛。与活化硅酸相比,聚硅酸钛在水中的分散物具有较大的粒径和更高的Zeta电位。通过对比制备的活化硅酸和聚硅酸钛的红外图谱发现,聚硅酸钛中有TiO-Si键,证明钛离子参与了聚合反应,新生成的化学键提高了它的聚合度和稳定性。采用硫酸铝为混凝剂,聚硅酸钛为助凝剂进行混凝除浊实验。测定了絮凝体的Zeta电位和混凝沉淀后的上清液浊度,研究了硫酸铝投加量和混凝p H对聚硅酸钛助凝效果的影响。结果表明,投加适量的聚硅酸钛助凝剂,明显提高了混凝除浊效果且拓宽了有效混凝p H值的范围。